Once you have a web site as well as an application, speed is essential. The swifter your web site works and then the swifter your apps work, the better for you. Considering that a web site is just a range of data files that connect with one another, the systems that store and work with these data files play an important role in site operation.

Hard drives, or HDDs, were, until the past several years, the most dependable products for storing information. Then again, lately solid–state drives, or SSDs, have already been becoming more popular. Check out our comparison chart to determine whether HDDs or SSDs are more appropriate for you.

1. Access Time

Image

SSD drives offer a fresh & ingenious solution to data safe–keeping using the use of electronic interfaces instead of just about any moving components and turning disks. This brand–new technology is considerably faster, allowing for a 0.1 millisecond data file accessibility time.

Image

HDD drives even now make use of the same fundamental file access technique that was actually developed in the 1950s. Despite the fact that it has been considerably enhanced after that, it’s slow compared with what SSDs are offering to you. HDD drives’ file access speed can vary in between 5 and 8 milliseconds.

2. Random I/O Performance

Image

The random I/O performance is vital for the general performance of a data storage device. We have run extensive lab tests and have identified an SSD can deal with at least 6000 IO’s per second.

Image

During the same lab tests, the HDD drives proved to be significantly slower, with simply 400 IO operations maintained per second. Although this may appear to be a large amount, if you have an overloaded web server that contains lots of well known web sites, a sluggish disk drive can result in slow–loading web sites.

3. Reliability

Image

The lack of moving components and spinning disks in SSD drives, as well as the latest advancements in electrical interface technology have led to a considerably safer file storage device, having an common failing rate of 0.5%.

Image

For the HDD drive to function, it needs to spin two metal hard disks at more than 7200 rpm, having them magnetically stable in the air. There is a number of moving components, motors, magnets and other devices stuffed in a small location. Consequently it’s no wonder that the regular rate of failure of any HDD drive varies between 2% and 5%.

4. Energy Conservation

Image

SSD drives are considerably smaller compared to HDD drives as well as they don’t possess virtually any moving components whatsoever. This means that they don’t make just as much heat and need a lot less power to function and less power for cooling down purposes.

SSDs consume somewhere between 2 and 5 watts.

Image

From the moment they have been developed, HDDs were always quite electricity–hungry devices. And when you have a web server with lots of HDD drives, it will boost the regular monthly electricity bill.

Typically, HDDs use up between 6 and 15 watts.

5. CPU Power

Image

SSD drives provide for a lot faster data file access speeds, which will, in turn, permit the CPU to perform file calls faster and afterwards to go back to other tasks.

The standard I/O wait for SSD drives is actually 1%.

Image

When compared to SSDs, HDDs permit not so quick file access rates. The CPU is going to lose time waiting for the HDD to return the demanded data file, reserving its assets for the time being.

The common I/O delay for HDD drives is around 7%.

6.Input/Output Request Times

Image

It’s time for a few real–world cases. We, at Ultimate Internet Services, produced a full system backup with a hosting server only using SSDs for file storage reasons. During that operation, the typical service time for an I/O call remained below 20 ms.

Image

All through the very same trials sticking with the same web server, now equipped out using HDDs, performance was noticeably slower. During the web server data backup procedure, the typical service time for any I/O requests ranged between 400 and 500 ms.

7. Backup Rates

Image

You are able to experience the real–world added benefits of having SSD drives each and every day. By way of example, with a web server designed with SSD drives, a full back up is going to take just 6 hours.

Image

On the flip side, with a server with HDD drives, the same backup normally takes 3 to 4 times as long to finish. An entire back up of an HDD–equipped web server typically takes 20 to 24 hours.

With Ultimate Internet Services, you will get SSD–operated hosting solutions at the best prices. The hosting plans feature SSD drives by default. Go in for an web hosting account with us and watch the way your websites can become much better without delay.


  • Service guarantees

  •  
  • Each one of our Virtual Private Servers is put together for you without charge. 99.9% network uptime. Full root and SSH access.
  • Compare our prices

  •  
  • Review the allocations and characteristics coming with our Virtual Private Servers. You could begin with a cheaper VPS Web Hosting setup and move up with just a mouse click as your necessities expand.
  • Compare our hosting plans
  • Contact Us

  •  
  • We are online for you 24x7x365 to reply to all queries in relation to our VPS Web Hosting platform. 60–min response time frame guarantee.